Hello-
I'm thinking of buying a pinpointer to help me to NOT make large holes while looking for that elusive piece of metal that I just detected. Anyone out there got an opinion on which way to turn? How much difference can there be in pinpointers?
Thanks,
unearth

What type of machine do you use? An in-line probe is best if you can get one for your model.

http://www.sunraydetector.com/

If not then I guess others can point out thier favorites.

Mike

I use the one given by Kellyco.. version 1... when you buy a metal detector from them.
It works OK if you dont mind carrying a ruler so to speak. B)

I am trying a Bullseye II 140 mm - dont really like it.... this probe does not have an audio indicator and doesnt seem to detect surface targets sometimes OR maybe it is defective.....


However, i am going to get a Sunray pinpointer which is actually a small coil itself
and some people from this forum wouldnt do without one...the downside? its about 180 dollars..... The Sunray attaches to the detector and uses the battery from the detector - it has a toggle to turn it on and off as needed. :P

Hello-
Sorry, I didn't mention the detector I was using. I'm using a DFX.
unearth

I use ase a bullseye II and it seems to work OK . I don't get alot of depth but it saves me alot of unnecessary digging and searching . It does have alittle switch in battery compartment to change from vibrate to buzzer . I use only vibrate . It is alittle awkward to carry but better than my first bullseye . I believe the cost is over $100. Hope this helps you alittle , I also would consider a sunray if I had the money .

My dealer threw in a Bullseye I with the DFX package I bought and I've loved it. The only problem I've had was that when it has a fresh battery it's pretty hypersensitive in wet soil. Also, the screw on the back needs to be kept relatively tight (DON'T strip!) to keep the probe stable and you need to check the side switch and make sure it's tight once every few months.

Also, I root around with mine a lot and the probe tip is starting to wear through. I'm going to give it a thorough cleaning and then try dipping it in some of that insta-plastic handle stuff for tools to give it another protective layer. That should work and be recoatable as it wears.

Check eBay for one, they usually have some pretty good deals going...

Unearth

The DX-1 by Sunray is what I would do. The sound comes through the headphones and it has good depth. I have the X-1 on my explorer and like most won't hunt without it.

It is a 1 inch coil and you flip a switch to go from primary coil to secondary (probe).

Mike

I'm using a Tinytec which is compact and easy to adjust for sensitivity. I wrapped some cello tape on the tip to protect it. It's worked well for me.

get the sunray inline probe. It's worth the $$

I mostly use the V2 from Kellyco. It's a bit large but works well.
I also have a Vibra-Probe but it causes lots of cross-talk with my
detectors and isn't very deep.

EC

I was detecting with the crew out in Flood Park today. It was like the Sunray Borg had attacked. I could hear a faint whisper over my headphones occasionally... "You will soon be assimilated"...

I'm on one of those things ASAP, like shine on a bowling ball...

Hi unearth,

Take the sound advice of msimon, bluefoot, and JustLooking. They advise the Sunray in-line probe. In your case a DX-1 model fits the DFX and MXT.

Purchased the DX-1 for my MXT almost 6 months ago. Over time I have found that the DX-1, like the main coil, can detect and pinpoint targets much deeper than it can ID targets. With the MXTs gain at +3 and in moist soil, my DX-1 will consistently ID a flat quarter at 3 inches. Under the same conditions, if you listen carefully, it will pinpoint a flat quarter at over 4 inches. The volume will be very low, but it can be done. By the way, my hearing is poor. So if I can do it anyone can.

The more you work with the DX-1 the better you will like it. Such as when the VDI jumps around and pinpoints shallow with the main coil, try using the DX-1. It will often sort out a good target beside a trash target.

The Sunray probes cost more than most pinpointers, but once you use one you will not regret spending the extra money.

Happy Hunting
Hunt4Fun

As for me, I still prefer my SXL Pro Merlin. Batteries last forever and It is still going strong after over four years of hard use. I've tried several of the others and I have not been all that impressed. Sometimes simple is best, just my two cents, hope that helps. :blink: